| PHYSICAL PROPERTIES |
LINER FABRIC |
TEST METHOD |
NOTES |
| Basis Weight (oz/yd2) |
10 |
ASTM D-3776 (ASTM D-1776) |
|
| Basis Weight (g/m2) |
340 |
|
|
| |
|
|
|
| Thickness (inches) |
0.06 |
ASTM D-1777 |
|
| Thickness (mm) |
1.5 |
|
|
| |
|
|
|
| Air Permeability (cfm/ft2) |
18 |
ASTM D-737 |
|
| Air Permeability (cc s-1/cm2) |
9 |
|
|
| |
|
|
|
| MECHANICAL PROPERTIES |
|
|
|
| MD Elmendorf Tear Strength (lbs) |
# |
ASTM D-1424 |
MD: Machine Direction (or wrap) |
| MD Elmendorf Tear Strength (Newtons) |
# |
|
#: Pre tear propogated perpindicular to load vs. parallel to load |
| |
|
|
|
| XD Elmendorf Tear Strength (lbs) |
1.9 |
ASTM D-1424 |
XD: Cross Direction or Weft/Fill |
| XD Elmendorf Tear Strength (Newtons) |
8 |
|
|
| |
|
|
|
| MD Tongue Tear Strength (lbs) |
4.9 |
ASTM D-2261 |
|
| MD Tongue Tear Strength (Newtons) |
22 |
|
|
| |
|
|
|
| XD Tongue Tear Strength (lbs) |
3.4 |
ASTM D-2261 |
|
| Xd Tongue Tear Strength (Newtons) |
15 |
|
|
| |
|
|
|
| MD Trapezoid Tear Strength (lbs) |
13 |
ASTM D-5587 |
|
| MD Trapezoid Tear Strength (Newtons) |
58 |
|
|
| |
|
|
|
| XD Trapezoid Tear Strength (lbs) |
6.9 |
ASTM D-5587 |
|
| XD Trapezoid Tear Strength (Newtons) |
31 |
|
|
| |
|
|
|
| MD Grab Strength (lbs) |
78 |
ASTM D-5034 |
|
| MD Grab Strength (Newtons) |
347 |
|
|
| MD Grab Strain (%) |
51 |
|
|
| |
|
|
|
| XD Grab Strength (lbs) |
40 |
ASTM D-5034 |
|
| XD Grab Strength (Newtons) |
178 |
|
|
| XD Grab Strain (%) |
61 |
|
|
| |
|
|
|
| Bursting Strength (lbs) |
60 |
ASTM D-3787 |
|
| Bursting Strength (Newtons) |
267 |
|
|
| |
|
|
|
| Tabor Abrasion - Face (cycles to failure) |
700 min. |
ASTM D-3884 |
|
| Tabor Abrasion - Back (cycles to failure) |
700 min. |
|
|
| |
|
|
|
| |
|
|
|
| SWEATING GUARDED HOT PLATE |
|
|
|
| Ret (m2 Pa/W) |
13 |
ISO-STD 11092 |
With a shell fabric, values estimated based on ret values for similar
liner/shell systems |
